CNH Store savings

Overview

RATED ENGINE HORSEPOWER @ 2200 RPM

119

RATED PTO HORSEPOWER

102

ANYTHING BUT BASIC

TS6 Series II tractors are affordable, big on power and efficiency, loaded with comfort, and ready to handle your toughest tasks.

MORE POWER AND TORQUE

Tier 4B engines provide more horsepower and torque than previous models while reducing emissions and fuel use.

REWARD YOURSELF WITH COMFORT 

Both the VisionsView™ cab and open, flat-deck platform give you plenty of room and operating ease.

HIGH-CLEARANCE MODEL AVAILABLE

The TS6.120 High-Clearance tractor nimbly maneuvers down rows of vegetable and specialty crops.

 

engine

A HUGE LEAP IN PERFORMANCE AND EFFICIENCY

TS6 Series II engines are Tier 4B emissions certified and deliver power and performance without compromise. The common rail fuel injection system provides precise metering of fuel injection which reduces engine noise, has better fuel combustion, higher horsepower per cylinder, lower emissions and enhanced fuel economy.

MORE POWER AND TORQUE THAN PREVIOUS TS6 MODELS

TS6 four-cylinder engines use the latest New Holland engine technology to maximize the power delivered per cylinder, resulting in performance that’s significantly better than the Tier 3 engine used on previous TS6 models. With four valves per cylinder, and the electronically controlled common rail fuel system, these engines generate more torque, more quickly and hold it longer for better lugging ability. You get better throttle response and a noticeable increase in loaded engine performance in difficult crop or soil conditions.

New Holland TS6 Series II TS6.120 High Clearance

ECOBLUE™ HI-ESCR TECHNOLOGY—ONE SIMPLE SOLUTION

New Holland’s ECOBlue HI-eSCR after-treatment system is a simple solution that not only reduces emissions, but also improves fuel efficiency so you complete more work with less fuel.

New Holland TS6 Series II TS6.120 High Clearance CLEANER AIR WITH DUST EJECTOR

The engine gets cleaner air thanks to a new radiator fan shroud that creates a vacuum that pulls debris from the air filter.

New Holland TS6 Series II TS6.120 High Clearance

ADDED VENTILATION

Slanted rear-side louvers provide additional ventilation for the Diesel Oxidation Catalyst (DOC).

 

visionview™ cab and rops platform

MORE COMFORT AND VISIBILITY

Operating ease and superior visibility are part of TS6 tractor design. Whether you choose a TS6 tractor with an open, flat-deck platform or the exclusive New Holland VisionView™ cab, you will experience industry-leading comfort and control. Both cab and non-cab models feature 360-degree visibility and the CommandArc™ console for easy use of all controls within the sweep of the operator’s arm.

New Holland TS6 Series II TS6.120 High Clearance

IMPROVED LIGHTING

The VisionView cab features eight work lights—four in front and four in back—for working at night or in low light. Non-cab models feature a rear work light mounted on the ROPS for continued work after dark.

New Holland TS6 Series II TS6.120 High Clearance

VISIONVIEW™ CAB

The VisionView cab features two wide clear doors, a large window in back and an expansive windshield with a sleek, curved roofline that gives you excellent visibility that is especially good for loader work. An optional high-visibility roof panel expands your view even higher so you get an effortless view to a raised loader bucket. The panel also opens for added ventilation. A retractable sunscreen for the upper windshield and roof window cuts glare

New Holland TS6 Series II TS6.120 High Clearance 10 VENTS FOR ALL-TEMPERATURE COMFORT

Dual-fan cooling and heating includes 10 vents to keep you comfortable no matter what the weather.

New Holland TS6 Series II TS6.120 High Clearance

COMFORTABLE SEATING

A comfortable mechanical suspension seat is standard with the Value package, while a deluxe air suspension seat with swivel and full-size, cushioned instructor seat is included in the Plus package and is optional on Value models.
New Holland TS6 Series II TS6.120 High Clearance

UNCLUTTERED FLAT-DECK PLATFORM

If you choose a TS6 tractor without a cab, you’ll find the spacious, open operator platform with ROPS is a great place to work. The true flat deck gives you plenty of foot and legroom since all pedals are suspended and there’s no driveline hump. The seat and tilt steering wheel adjust for your comfort, and the dash-mounted instrument cluster gives you a clear view of operating information.

 

transmission

PROVEN CHOICES TO MATCH YOUR NEEDS

TS6 Series II tractors offer a selection of reliable transmissions, including a choice of a 19-mph or 25-mph road speed (4WD only) and choice of mechanical or power (forward/reverse) shuttle.

POWER SHUTTLE

New Holland TS6 Series II TS6.120 High Clearance

The easy-to-use, left-hand power shuttle provides fast, smooth direction changes and is ideal for loader work.

25-MPH (40-KPH) ROAD SPEEDNew Holland TS6 Series II TS6.120 High Clearance

Choose the faster 25-mph road speed (4WD only) for faster field-to-field travel and to shorten long transport trips.

10:1 CREEPER

For slow-speed applications, an optional 10:1 Creeper is available on all transmissions to provide speeds as slow as 0.136 mph. You engage it electro-hydraulically using a switch on the Command Arc™ console.

 

hydraulics and 3-point hitch

TOTAL FLOW UP TO 29 GPM

TS6 Series II tractors have the hydraulic flow to handle demanding implements. Both Value and Plus models feature a 13-gallon-per-minute (gpm) implement pump and a dedicated 7-gpm steering pump. A 9-gpm auxiliary pump is standard on Plus models and optional on Value models, for a total flow of 29-gpm. Implement hydraulic oil flow will be less than pump flow measured at the remote couplers.

REAR REMOTESNew Holland TS6 Series II TS6.120 High Clearance

Rear hydraulic remote valves are controlled by the ergonomically placed levers on the CommandArc™ control console. Two deluxe closed-center hydraulic remote valves with couplers are standard equipment, with an optional third and fourth valve.

UP TO 7,326 POUNDS OF LIFTNew Holland TS6 Series II TS6.120 High Clearance

You can handle heavy three-point-mounted implements with ease. The standard 3,735-pound lift capacity is a great match for most implements. Increase it to 5,499 pounds by adding one optional auxiliary lift cylinder, or add two lift cylinders to increase to 7,326-pound lift capacity. No matter how heavy the implement, the standard telescoping stabilizers and flexible link ends provide easy hook-up to any 3-point hitch tool. External ground control of the three-point hitch is included with the Plus package.

 

axles

AXLES THAT ARE RIGHT FOR THE JOB

You can tailor your TS6 front and rear axles to match your specific needs.

2WD FRONT AXLES

If you need a simple powerhouse, then the 2WD front axle is the right choice for you. On the TS6.110 and the TS6.120, choose from a standard-duty 2WD front axle with a 5,000-pound capacity, or the heavy-duty 2WD front axle with a 6,614-pound capacity for loader work. The heavy-duty 2WD front axle is standard on the larger TS6.130 and TS6.140 models.

4WD FRONT AXLESNew Holland TS6 Series II TS6.120 High Clearance

If you need more traction or pulling ability, consider upgrading to the 4WD front axle. The standard-duty 4WD front axle for the TS6.110 and TS6.120 tractors offers a capacity of 8,378 pounds. The 9,039-pound-capacity, heavy-duty front axle handles the additional weight and stress that comes from higher horsepower applications. It’s standard on TS6.130 and TS6.140 models.

REAR AXLESNew Holland TS6 Series II TS6.120 High Clearance

If you are mowing, raking, baling, or simply don’t need to worry about row spacing, the standard, heavy-duty flange axle is the perfect choice for you. If you need more flexibility, choose the 98-inch bar axle. It adds rigidity and adjustability to straddle wide hay swaths or for row-crop applications.

 

technical specifications

Engine Type

4 cylinder, 16 valve, high pressure common rail, air-to-air intercooled turbo diesel

Engine make / model

Fiat Powertrain Industrial / FPT NEF

Engine displacement (cu. in. (L))

274 (4.5 )

Rated engine horsepower @ 2200 RPM

119

Rated PTO horsepower

102

Emissions certification

Tier 4B/Final

Fuel Tank Capacity (gal. (L))

57.5 (217.6)

DEF (AdBlue®) Tank Capacity (gal. (L))

7.9 (30)

Alternator amps

120

Battery

12 volt w/ 950 CCA

Base transmission

8x8 synchronized with left hand controlled mechanical shuttle

Optional transmission

8x8 synchronized with left hand controlled hydraulic shuttle

Premium transmission

Creeper option

10:1 gear ratio

PTO rpm

540/1000

3-point hitch

Category II w/flex link ends

Base, 3-point hitch ASAE lift capacity (lbs. (kg))

3,735 (1693)

Option 3, 3-pt. ASAE lift capacity (lbs. (kg))

5,499 (2499)

Option 2, 3-pt. ASAE lift capacity (lbs. (kg))

7,326 (3323)

System type

Fixed displacement pumps (steering, implement, aux) with combining/diverter valve

Hydraulic implement pump flow* (gpm (Lpm))

13 (49)

Optional auxiliary hydraulic pump flow* (gpm (Lpm))

9 (34)

Rear hydraulic remote valves*

Deluxe closed center with flow control and quick connect couplers

Front standard 2WD adjustable tread width (in. (mm))

Front HD 2WD adjustable tread width (in. (mm))

Rear flange axle adjustable tread width (in. (mm))

Rear bar axle adjustable tread width (in. (mm))

Rear axle type

External drop box final drive with internal wet brakes

Front 4WD adjustable tread width (in. (mm))

61.4 (1,560) to 88.8 (2256)

Front 4WD adjustable tread width (in. (mm))

61.4 (1,560) to 88.8 (2256)

Rear 4WD adjustable tread width (in. (mm))

72 (1829) to 100 (2540)

Ground clearance** (lowest part of front axle) (in. (mm))

25.25 (616)

Weight (shipping, 4WD, cab, flange axle) (lbs. (kg))

11,883 (5390)

Weight (shipping, 4WD, cab, bar axle) (lbs. (kg))

Weight (shipping, 2WD, cab) (lbs. (kg))

Weight (shipping, 4WD, ROPS, flange axle) (lbs. (kg))

10,957 (4970)

Weight (shipping, 4WD, ROPS, bar axle) (lbs. (kg))

Max. tractor weight (G.V.W.), Cab, 4WD (lbs. (kg))

17,196 (7800)

Wheel base 4WD (Std. Duty Class 3) (in. (mm))

107.5 (2730)

Wheel base 4WD (HD Class 3) (in. (mm))

Wheel base 2WD standard duty (6 bolt hub) (in. (mm))

Wheel base 2WD heavy duty (8 bolt hub) (in. (mm))

Overall length 4WD w/ front weights (in. (mm))

192.9 (4900)

Overall length 2WD w/ front weights (in. (mm))

Height to top of cab (in. (mm))

Height to top of ROPS (in. (mm))

128.9 (3275)

Height to top of exhaust (in. (mm))

121.4 (3085)

Available Offering Configurations

MFD only, ROPS only

literature
Name Link
TS6 Tractors - Brochure Download
Technical specifications Download
Contact Information

 Contact Information

Bob Mark New Holland - Lindsay

2197 Little Britain Road
Lindsay   Ontario , K9V 4S5

(705) 324-2221

Location