CNH Store savings

Overview

Landoll 950E TRAVELING TAIL TRAILER VIPER RED MAXIMIZE PAYLOAD AND PROFITABILITY

The 950E Traveling Tail Trailer has 50-ton capacity and three 25,000 lbs axles. It offers tail lengths of 12′ and 15′, and overall lengths of 45′, 48′ and 51′. It includes the same rugged four beam construction and other outstanding features of the 900 E-Series – standard powder coat paint, stable rigid dock arm, 24,000 lbs tail-lifting capacity and a centralized grease system. Landoll is the only trailer manufacturer to offer powder coat paint on large trailer frames.

Landoll 950E TRAVELING TAIL TRAILER VIPER RED WHY OWN A 900 E-SERIES

Quick, simple, safe operation and a longer wheelbase that increases payload. A 15′ tail reduces the load angle to a low 11°. Frames are steel shot blasted in preparation for the TGIC polyester powder coat paint finish standard on 900 E-Series trailers. The tail can raise and lift 24,000 lbs up to 57″ dock height. The 900 E-Series trailers are backed by a 5-year structural warranty.

Landoll 950E TRAVELING TAIL TRAILER VIPER RED WORK WITH EASE

The low-load tail angle ensures easy clearance for loading low-sitting equipment, providing seamless loading capabilities. The hydraulic control allows for efficient and convenient loading and unloading operations, all managed through a single control point.

frame & general

Capacity*    50 Ton (100,000 lbs.)
Deck Rating    70,000 lbs. in 10′
Estimated Base Weight    19,890 lbs. (51′) +/-3%
Main Frame    Fabricated 100,000 PSI Yield 4-Beam Design
Crossmembers    4″ Junior I-Beam and 3″ Junior I-Beam on 8″ Centers
Slope Drop    90°
Parking Stands    Jost Two Speed Landing Gear
Pin Setting    18″
Swing Clearance    84″
Hitch    Fifth-Wheel Kingpin
Deck Width    102″
Loaded Deck Height    38″
Loaded Ground Clearance    20″
Decking    1-3/8″ Apitong Hardwood (Lower Deck)
Tool Box    Twin Upper Deck Mounted Top-Opening with Non-Weight Bearing Lid Illuminated
Tie Downs    Double Key Hole Chain Slots / Square Stake Pockets on 16″ Centers / (6) Double Keyhole Chain Slots on Tail / (2) D-Rings Lower Deck at Slope
Tail Lifting Capacity    24,000 lbs.
Load Angle    11° with 15′ Tail
Features    Automatic Slack Adjusters, Flat Approach Plate, Apitong Wood Covered Tail, Center Deck Keyholes on Tail, Bolt-On Traction Plate Over Approach Plate

suspension & undercarriage
Suspension    Neway Air Ride RLU228, 22,500 lbs. Capacity with Manual Dump Valve
Undercarriage    Centralized Grease System
Axles    (3) 25,000 lbs. Axles, Dual Tire, Oil Bath Bearings, Outboard Brake Drum, Automatic Slack Adjusters
Axles Prepped for Air Inflation
Brakes    12.25 x 7.5 Full Air / Spring Brakes ABS 4S2M, Center Axle Indirect
Tires    235/75R 17.5 LRJ Double Coin
Rims    17.5 x 6.75 Tubeless
Wheels    Steel Hub Pilot
Oil Seal Hubs    Internal Mated Assembly
hydraulics
Hydraulic Hook Up    Quick Couplers / 2,500 PSI – 20 GPM at Controls, 50 GPM Max
Hydraulic Winch    Upper Deck 12,000 lbs. Worm Gear with 85′ of 1/2″ Cable with Wear Plate
Hydraulic Valve Body    Rexroth
electrical
Air / Electrical    7 Way Receptacle
Lights    Grote MicroNova LED Clear Lens-Enhanced Stop, Tail & Turn; Rear Amber Strobe-10 Year Warranty
Wiring Harness    Grote “Xtreme” Wiring Harness (7-year warranty)
finish & color
Finish    Steel Grit Shot Blast to Bright Metal
Color    Zinc Rich Primer
Powder Coat Color    White, Black, Yellow, Blue, Red, Green, Metallic Gray, Sapphire Blue
Decals    Hi-Visibility Reflective Package
specs
Landoll 950E TRAVELING TAIL TRAILER VIPER RED
Contact Information

 Contact Information

Bob Mark New Holland - Lindsay

2197 Little Britain Road
Lindsay   Ontario , K9V 4S5

(705) 324-2221

Location