ID # 31618880

New Holland Discbine® Side-Pull Disc Mower-Conditioners - Discbine® 209

Call for Price
Overview

CUTTING WIDTH (FT. IN. (M))

9’ 2” (2.8)

NUMBER OF DISCS

7

FAST, SMOOTH CUTTING

The maneuverable 9’2” (2.8 m) Discbine® 209 and the 10’4” (3.16 m) Discbine® 210 make high-quality hay with the smooth, trouble-free performance you expect from a genuine Discbine®.

CUT WITH EVEN MORE CONFIDENCE

For ultimate peace of mind, a 2-year base warranty is standard along with an additional year of the MowMax™ cutterbar warranty so you can cut with even more confidence.

STANDARD QUICKMAX™ KNIFE CHANGE SYSTEM 

The QuickMax knife change system makes it easy to keep knives sharp for the close, clean cut you want and increased tonnage.

HIGH QUALITY AND FAST DRYDOWN  

Choose the best conditioning system for your crops – rubber chevron rolls, steel chevron rolls or LeaningEdge™ flail tines.

 

Specifications
Model
Discbine® Side-Pull Disc Mower-Conditioners
Category Name
Equipment
Year
2024
Sale Type
New
Manufacturer
New Holland
mowmax™ disc cutterbar

MOW FAST AND DRY FAST - BALE SOONER

When the weather forecast is just right, it’s time to mow. Often the perfect haymaking window threatens to close without warning. You can’t control the weather but you can choose the tools that help you work quickly. Discbine® models with the MowMax™ disc cutterbar offer fast mowing and smooth uniform crop flow to the conditioner that can help open your haymaking window.

UNIFORM CROP FLOW DELIVERS CONSISTENT CONDITIONING AND FAST DRYINGNew Holland Discbine® Side Pull Disc Mower Conditioners Discbine® 209

When pairs of MowMax™ discs turn toward one another, they cut then swiftly move mown crop to the wide New Holland conditioning system. This fast, uniform crop flow results in more uniform conditioning, and well-distributed, fast-drying swaths. Other designs feature discs that rotate toward the center of the machine, throwing crop forward and moving it toward the center of the machine. These designs often result in more crop passing through the center part of the conditioner, leading to less consistent conditioning and swath formation, which can slow drying.

RELIABILITY WHEN IT’S TIME TO MOWNew Holland Discbine® Side Pull Disc Mower Conditioners Discbine® 209

The MowMax™ disc cutterbar stands apart from many others because it is designed to resist damage and minimize downtime even when the worst happens. The MowMax cutter bar uses sealed disc gearboxes, each with an independent oil sump, so it’s impossible for a loose gear tooth to damage adjacent modules. While others claim a modular disc system, their gear cases are segmented and the assembly shares a common or interconnected oil sump, allowing the possibility of internal damage to affect adjacent segments.

RESPOND TO CHANGES WITH FULL CONTROL OF CUTTING HEIGHT AND ANGLENew Holland Discbine® Side Pull Disc Mower Conditioners Discbine® 209

You can tip the disc header back on-the-fly to protect the knives using the standard Discbine® 210 hydraulic header tilt. It’s integrated into the lift circuit, without the need for a third remote. The hydraulic cylinder first tips the disc head back before lifting the head. When conditions improve, place the tractor’s remote valve into the float position and the head will automatically resume your preset height. The hydraulic header tilt option is also available for the Discbine® 209 without the need for a third remote.

YOUR CONTINUED PEACE OF MIND IS PART OF THE DESIGN.New Holland Discbine® Side Pull Disc Mower Conditioners Discbine® 209

Not only does the MowMax™ cutterbar slice smoothly through difficult crops, it gives you the security that comes from built-in impact protection and simple maintenance.

EXPECT THE UNEXPECTED. NEVER LET IT SLOW YOU DOWN.New Holland Discbine® Side Pull Disc Mower Conditioners Discbine® 209

Uneven ground and unexpected field obstacles are a fact of life, but there’s no need to worry because Discbine mower-conditioners feature New Holland’s ShockPRO™ disc drive hubs. They protect disc drive modules before damage occurs and are quick to replace if needed. Here’s how it works: when a disc encounters an obstruction, the partially splined hub is designed to shear, protecting the cutterbar drive. The shearing action is external of the module oil sump, with no risk of contamination. A stack of washers acts like a slip clutch to assure reliable positive drive and keep everything firmly fitted to prevent damage to adjacent discs, giving you time to stop and replace the single, damaged hub with minimum cost and interruption.

RELIABLE AND STRONG PROTECTION STARTS OUT FRONTNew Holland Discbine® Side Pull Disc Mower Conditioners Discbine® 209

New Holland rock guards absorb and dissipate the force of a direct collision from their position just ahead of the discs. Their heavy-duty, ductile cast-iron construction means they will not bend or distort with repeated impacts for continued cutterbar protection. As the cutterbar moves over the ground, the suspension system protects the cutterbar by allowing the header to move up and back, absorbing impacts. As the header raises, the weight remains relatively unchanged, protecting the head through its working range.

SET THE HEIGHT YOU LIKE  New Holland Discbine® Side Pull Disc Mower Conditioners Discbine® 209

It’s easy to set cutting height using the provided travel-limiting pin. For the highest cut height, insert the pin into the rearmost hole. For the low setting, remove the pin and store it on the cylinder, and the head moves through the full tilt range. While many competitors use turnbuckles that can rust and seize, the Discbine® travel-limiting, four-position pin means haymakers can quickly set their cutting height to crops and conditions. For the best performance, operate headland lift in the float position, and the flotation system allows the head to tip back to adapt to terrain.

CLEANLY CUT ALL OF YOUR CROP, EVEN OVER UNEVEN TERRAINNew Holland Discbine® Side Pull Disc Mower Conditioners Discbine® 209

The Discbine header closely follows changing ground contours since it is suspended independently from the trail frame, so you get clean, smooth cutting, with reduced stubble damage and skid shoe wear.

NO-HASSLE ACCESS THAT SAVES TIMENew Holland Discbine® Side Pull Disc Mower Conditioners Discbine® 209

Heavy-duty steel shielding protects the operator during use, yet it opens wide with the tongue in any position and latches open to reveal nearly the full width of the cutterbar. That makes periodic maintenance like blade changing even easier. The front steel hood is fitted with a poly impact liner that resists dents, so your mower keeps looking good. Others may claim large, wide-opening hoods but you’ll find they don’t compare to the accessibility of a genuine Discbine® disc mower-conditioner.

quickmax™ knife change system

SAVE TIME AND MOW BETTER WITH THE QUICKMAX™ KNIFE CHANGE SYSTEM

When you use sharp knives, you get a smooth finish, add tons to your harvest and improve the cut quality of future cuttings. With the QuickMax system, a special knife tool allows you to change bent or dull knives in less time than getting out of the tractor, so you save time and crop.

 

technical specifications

Cutting width (ft. in. (m))

9’ 2” (2.8)

Cutterbar model

MowMax™ Modular Cutterbar with ShockPRO™ hubs

Number of discs

7

Knives per disc

2

Disc speed @ 540 rpm PTO speed (rpm)

3000

Tilt angle (degrees)

2° - 10°

Flotation

Up & back, adjustable springs

Drive method

PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar

Cutting height (in. (mm))

1.1-2.7 (29-68)

Cutting height w/optional high-stubble shoes (in. (mm))

2.25-4.5 (58-115)

Cutting height w/optional adjustable shoes (in. (mm))

2.25-4.5 (58-115)

Type

Chevron intermeshing rubber

Length / Diameter (in. (mm))

90 (2286) / 10.4 (264)

Drive method

4 HB V-belt and enclosed gears

Speed (rpm)

647

Conditioner roll tension adjustment

Single crank

Conditioner gap adjustment

Adjustable drawbolt stop, each end

Type

Flail rotor with 90 tapered flails

Length / Diameter (in. (mm))

90 (2286) / 22 (560)

Drive method

4 HB v-belt

Speed (rpm)

718 standard, 1000 optional

Conditioner gap adjustment

Single crank adjustable rotor hood

Swath width (ft. (m))

6 (1.83)

Windrow width (ft. (m))

3-6 (0.9-1.83)

Input speed (rpm)

540

Driveline protection

Slip clutch and overrunning clutch assembly at rear of PTO shaft

Secondary driveline

Non-CV driveline

Type

Side-pull, straight tongue

Hitch type

Drawbar with CV PTO

Minimum PTO power required (hp (kW))

65 (49)

Hydraulic circuits required

2

Minimum relief pressure required (psi (bar))

1500 (103)

Drawbar

ASAE Category II

Swivel Hitch - Drawbar

Swivel Hitch - 2-Point

Electrical

7-pin electrical connector for transport lights

Tubeless ag rib implement tires

9.5L x 14L 6PR

Max road speed (mph (kph))

20 (32)

Width, transport (ft. in. (m))

9’ 11” (3.02)

Width , operating (ft. in. (m))

14’ 10” (4.52)

Length, transport (ft. in. (m))

Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)***

Length, operating (ft. in. (m))

Flail Tine: 17’ 8’’ (5.4)*** or Roll: 17’ 2’’ (5.23)***

Height (ft. in. (m))

Transport: 5’ 8” (1.73) / Operating: 4’ 5” (1.35)

Ground clearance with head fully raised (in. (mm))

17 (4.32)

Operating weight (lbs. (kg))

Flail Tine: 3690 (1674)*** / Roll: 3740 (1697)***

literature
Name Link
Discbine® 209/210 Side-Pull Disc Mower-Conditioners - Brochure Download
Technical specifications Download
Documents