- Monday 8:00 AM - 5:00 PM
- Tuesday 8:00 AM - 5:00 PM
- Wednesday 8:00 AM - 5:00 PM
- Thursday 8:00 AM - 5:00 PM
- Friday 8:00 AM - 5:00 PM
- Saturday 8:00 AM - 12:00 PM
- Sunday Closed
MAXIMIZE PAYLOAD AND PROFITABILITYThe 950E Traveling Tail Trailer has 50-ton capacity and three 25,000 lbs axles. It offers tail lengths of 12′ and 15′, and overall lengths of 45′, 48′ and 51′. It includes the same rugged four beam construction and other outstanding features of the 900 E-Series – standard powder coat paint, stable rigid dock arm, 24,000 lbs tail-lifting capacity and a centralized grease system. Landoll is the only trailer manufacturer to offer powder coat paint on large trailer frames. |
WHY OWN A 900 E-SERIESQuick, simple, safe operation and a longer wheelbase that increases payload. A 15′ tail reduces the load angle to a low 11°. Frames are steel shot blasted in preparation for the TGIC polyester powder coat paint finish standard on 900 E-Series trailers. The tail can raise and lift 24,000 lbs up to 57″ dock height. The 900 E-Series trailers are backed by a 5-year structural warranty. |
WORK WITH EASEThe low-load tail angle ensures easy clearance for loading low-sitting equipment, providing seamless loading capabilities. The hydraulic control allows for efficient and convenient loading and unloading operations, all managed through a single control point. |
Capacity* 50 Ton (100,000 lbs.)
Deck Rating 70,000 lbs. in 10′
Estimated Base Weight 19,890 lbs. (51′) +/-3%
Main Frame Fabricated 100,000 PSI Yield 4-Beam Design
Crossmembers 4″ Junior I-Beam and 3″ Junior I-Beam on 8″ Centers
Slope Drop 90°
Parking Stands Jost Two Speed Landing Gear
Pin Setting 18″
Swing Clearance 84″
Hitch Fifth-Wheel Kingpin
Deck Width 102″
Loaded Deck Height 38″
Loaded Ground Clearance 20″
Decking 1-3/8″ Apitong Hardwood (Lower Deck)
Tool Box Twin Upper Deck Mounted Top-Opening with Non-Weight Bearing Lid Illuminated
Tie Downs Double Key Hole Chain Slots / Square Stake Pockets on 16″ Centers / (6) Double Keyhole Chain Slots on Tail / (2) D-Rings Lower Deck at Slope
Tail Lifting Capacity 24,000 lbs.
Load Angle 11° with 15′ Tail
Features Automatic Slack Adjusters, Flat Approach Plate, Apitong Wood Covered Tail, Center Deck Keyholes on Tail, Bolt-On Traction Plate Over Approach Plate
Suspension Neway Air Ride RLU228, 22,500 lbs. Capacity with Manual Dump Valve Undercarriage Centralized Grease System Axles (3) 25,000 lbs. Axles, Dual Tire, Oil Bath Bearings, Outboard Brake Drum, Automatic Slack Adjusters Axles Prepped for Air Inflation Brakes 12.25 x 7.5 Full Air / Spring Brakes ABS 4S2M, Center Axle Indirect Tires 235/75R 17.5 LRJ Double Coin Rims 17.5 x 6.75 Tubeless Wheels Steel Hub Pilot Oil Seal Hubs Internal Mated Assembly |
Hydraulic Hook Up Quick Couplers / 2,500 PSI – 20 GPM at Controls, 50 GPM Max Hydraulic Winch Upper Deck 12,000 lbs. Worm Gear with 85′ of 1/2″ Cable with Wear Plate Hydraulic Valve Body Rexroth |
Air / Electrical 7 Way Receptacle Lights Grote MicroNova LED Clear Lens-Enhanced Stop, Tail & Turn; Rear Amber Strobe-10 Year Warranty Wiring Harness Grote “Xtreme” Wiring Harness (7-year warranty) |
Finish Steel Grit Shot Blast to Bright Metal Color Zinc Rich Primer Powder Coat Color White, Black, Yellow, Blue, Red, Green, Metallic Gray, Sapphire Blue Decals Hi-Visibility Reflective Package |