ID # 33458772

H&S Top Dog Semi-trailer Forage Boxes

Videos

Call for Price

Get a Quote Get Financed Value a Trade Contact Us Book a Demo Get Directions Get Directions Print

H&S Forage Boxes are built to last! Whether you have a small operation, or you are a custom operator, H&S has a Forage Box to fit your needs.
H&S manufactures one of the most complete line of Forage Boxes in the industry. Whether you have a small operation, or you are a custom operator. H&S has a Forage Box to fit your needs.

Specifications

Model

40'

Category Name

Agriculture

Year

2023

Sale Type

New

Manufacturer

H&S

UPRIGHTS

2″ X 2″ X 3/16″ TUBULAR STEEL SET ON 16” CENTERS

BOX WEIGHT

20,270 LBS

SIDE HEIGHT

142.5″

DRIVE SYSTEM

DUAL HYDRAULIC MOTORS

INSIDE WIDTH

98″

INSIDE HEIGHT

86″

INSIDE LENGTH

40′

OVERALL WIDTH

102″

OVERALL LENGTH

41′ 7″

REAR DRIVE SHAFT

2 ¼″ 1045 STEEL

FRONT IDLER SHAFT

1 ¾″ 1045 STEEL

FINAL DRIVE SYSTEM

DUAL FINAL DRIVE W/OIL BATH AND SPRING LOADED TIGHTENER

MAIN APRON CHAIN & SLATS

PL88C OPEN BARREL PINTLE 2″ X 1″ X 3/16″ FORMED APRON CHANNELS

CAPACITY – STRUCK LEVEL

2275 CU. FT.

OVERALL HEIGHT INCLUDING TAILGATE

13′

features

AVAILABLE IN 36′ AND 40′ LENGTHS, the “TOP DOG” Semi-Trailer Forage Box is completely Designed & Manufactured by H&S.
The main frame is made of high quality formed steel 10″ I-Beams for the rear, and compressed down to 5.13″ in the front with full length front gussets.
New 25,000# spring axles w/heavy duty spindles are standard.
16 Gauge Stainless Steel Sides.
The PL88C OPEN BARREL main apron pintle chain @ 29,900# per strand stays flexible. 2″ x 1″ x 3/16″ formed apron channels are used for the apron cross bars.
A formed stainless steel center between the aprons eliminates any feed build-up for a complete clean out.
The floor is ½″ thick virgin grade solid poly.
The “TOP DOG” features 1″ steel lines to the back of the box and DUAL HYDRAULIC MOTORS. The motors evenly drive each final drive system for more power and less shaft stress than a single motor system.
The drive shaft features MD nylon reversible style bearings.
Panels above the front & rear wheels act as a chain slide for the main apron, and protect mud and debris from getting to the apron chain.
Large 17″ x 28″ front window for viewing when unloading.
The idler apron shaft assembly features 6 tooth machined steel sprockets with bronze idler bushings.
Apron tension adjustment is made by tightening the 4 spring loaded tightener bolts on the front of the box. The spring loaded tighteners maintain tension on the apron during start up and operation.
The standard Gate Delay for the Top Pivot Door with door locks allows you to clean the box out completely without material hanging up. Barn doors with air closure are optional.
LED Lighting is standard equipment.
Customer Farm Name – NO CHARGE!
Options include a Rollback or Side to Side Tarp and Grain Hopper.