Back
ID # 33459079

Landoll B40AC-DR / B50AC-DR FORKLIFT

  • Landoll B40AC DR / B50AC DR FORKLIFT
  • Landoll B40AC DR / B50AC DR FORKLIFT
  • Landoll B40AC DR / B50AC DR FORKLIFT
  • Landoll B40AC DR / B50AC DR FORKLIFT
Call for Price
 Get a Quote  Get Financed  Value a Trade  Contact Us  Book a Demo   Get Directions  Print
Overview

Landoll B40AC DR / B50AC DR FORKLIFT

DEEP REACH
The Bendi B40AC-DR and B50AC-DR forklifts can stack loads two deep in aisles as narrow as 96” (2.43 M)*, have a starting capacity of 2,500 lbs (1,136 kg) at 24” (600 mm) load center and lift heights available to 35′ 5″ (10.80 M). The reach from face to mast is 52” (1,321 mm) and the integral pantograph reach stroke is 41” (1,041 mm) They have a 33” (838 mm) wide tilting and side shifting fork carriage.

They are a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. The Bendi B40AC-DR and B50AC-DR can work inside and outside on paved surfaces and have a floating front axle allowing the truck to ride smoothly over uneven floors. They can do the same jobs as reach and counterbalanced trucks but in much narrower aisles.
Landoll B40AC DR / B50AC DR FORKLIFT EXCEPTIONAL PERFORMANCE AND MANEUVERABILITY
Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B40AC-DR / B50AC-DR provides exceptional control and makes load placement and retrieval superior to the competition.
Landoll B40AC DR / B50AC DR FORKLIFT 3-STAGE MAST
The new mast has a rigid mounting and as standard a tilting and side shifting carriage. The new design offers increased mast rigidity, capacity and improved visibility. Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast. Lowered heights have been reduced and a new mounting position on the 48” (1,219 mm) wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance. Mountings for cameras have been integrated into the inner mast and an optional integral side shifting fork positioner combination is also available.
Specifications
Model
B40AC-DR / B50AC-DR FORKLIFT
Category Name
Agriculture
Year
2024
Sale Type
New
Manufacturer
Landoll
features
2,500 lb. (1,136kg) and 3,000 lb. (1,364kg) Capacity at 24″ (600mm) Load Center
Four-Wheel Design, Dual Rear Wheel Drive
Integral 8″ (200mm) Stroke Sideshifter and 36″ (914mm) High Load Backrest
Hydraulic Power Steering – Front Wheel Steer
Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
AC Traction and Hydraulic Motors Ensure Minimal Maintenace and High Efficiency
Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
High-Efficiency Curtis AC Controllers Provide Trouble Free Operation
Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
48 Volt Electrical System
Optional Cold Storage Conditioned to -22°F (-30°C)
specs
Four Wheel Design, Dual Rear Wheel Drive
8” (200 mm) Stroke Integral Side Shifter
41” (1041 mm) Stroke Integral Pantograph Reach
52” (1321 mm) Reach From Face of Mast
33” (838 mm) Wide Tilting and Side Shifting Fork Carriage
Adjustable Seat and Steering Wheel
Rotation via DuraSteerTM Actuator, with 5-Year Warranty on Articulation
Dual Curtis AC Traction Motor Controllers
Curtis AC Hydraulic Motor Controller
Battery Discharge Indicator with Slow Alert
Hydraulic Disk Brakes
“Floating” Articulated Front Axle
One Parts and Operator’s Manual Included
Curtis Engage Dash Display
Hand Actuated Parking Brake
36” (914mm) High Backrest
High Visibility Mast
170˚ Rear View Mirror
Safety Seat Switch and Seat Belt
Fixed Mast with Carriage Tilt of 3º Fwd / 4º Rwd
48 Volt Electrical System
Three Section Hydraulic Control Valve
Smooth Rubber Drive Tires
Soft Polyurethane Load Wheel Tires
40” Tapered Tip Forks – Rear Tow Hitch Pin
Meets ANSI B56.1

Newsletter Sign Up

*