Back
ID # 33459078

Landoll B40AC-HL / B50AC-HL FORKLIFT

  • Landoll B40AC HL / B50AC HL FORKLIFT
  • Landoll B40AC HL / B50AC HL FORKLIFT
  • Landoll B40AC HL / B50AC HL FORKLIFT
  • Landoll B40AC HL / B50AC HL FORKLIFT
Call for Price
 Get a Quote  Get Financed  Value a Trade  Contact Us  Book a Demo   Get Directions  Print
Overview

Landoll B40AC HL / B50AC HL FORKLIFT

HIGH LIFT
The Bendi B40AC-HL and B50AC-HL forklifts work in aisles as narrow as 78″ (1.98M)*, have a starting capacity of 4,400 lbs (1996 kg) at 24″ (600mm) load center and lift heights available to 41′ (12.50M).

They are a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. The Bendi B40AC-HL and B50AC-HL can work inside and outside on paved surfaces and have a floating front axle allowing the trucks to ride smoothly over uneven floors. They can do the same jobs as reach and counterbalanced trucks but in much narrower aisles.
Landoll B40AC HL / B50AC HL FORKLIFT EXCEPTIONAL PERFORMANCE AND MANEUVERABILITY
Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B40AC-HL/B50AC-HL provides exceptional control and makes load placement and retrieval superior to the competition.
Landoll B40AC HL / B50AC HL FORKLIFT 3-STAGE MAST
The new mast has a rigid mounting and as standard a tilting and side shifting carriage. The new design offers increased mast rigidity, capacity and improved visibility. Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast. Lowered heights have been reduced and a new mounting position on the 42” (1067 mm) wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance. Mountings for cameras have been integrated into the inner mast and an optional integral side shifting fork positioner combination is also available.
Specifications
Model
B40AC-HL / B50AC-HL FORKLIFT
Category Name
Agriculture
Year
2024
Sale Type
New
Manufacturer
Landoll
features
4,400 lb. (1,996kg) and 5,000 lb. (2,268kg) Capacity at 24″ (600mm) Load Center
Four-Wheel Design, Dual Rear Wheel Drive
Adjustable Seat and Steering Wheel
Integral 11.2″ (285mm) Stroke Sideshifter and 36″ (914mm) High Load Backrest
DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
High Visibility Mast Allows Optimum Safety and Control
Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
High-Efficiency Curtis AC Controllers Provide Trouble Free Operation
Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
48 Volt Electrical System
Optional Cold Storage Conditioned to -22°F (-30°C)
specs
4,400 lb. (1,996kg) and 5,000 lb. (2,268kg) Capacity at 24” (600mm) Load Center
Lift Heights to 492” (12.5M)
Four-Wheel Design, Dual Rear Wheel Drive
High Visibility 3-Stage Mast
Integral 11.2” (285mm) Stroke Side Shifter and 36” (914mm) High Load Backrest
Adjustable Seat and Steering Wheel
Dual Curtis AC Traction Motor Controllers
Curtis AC Hydraulic Motor Controller
Battery Discharge Indicator with Lift Interrupt
Electronic Regenerative and Hydraulic Disc Braking
“Floating” Articulated Front Axle
180º Front-End DuraSteer™ Articulation / Steering Assembly with 5-Year Warranty
Safety Seat Switch, Seat Belt and Rear View Mirror
Curtis Engage Dash Display
Hand Actuated Parking Brake
Non-Tilting Rigid Mounted Mast
Carriage Tilt 0º Forward / 3º Backward
Smooth Rubber Drive Tires
Soft Polyurethane Load Wheel Tires
40” (1,000mm) Tapered Tip Forks – Rear Tow Hitch Pin
Three Section Hydraulic Control Valve
Meets ANSI B56.1

Newsletter Sign Up

*