H&S LW1100 Linewrap In-Line Bale Wrapper

Features

• Efficiently wraps round bales from 4′ to 6′ in diameter, and large square bales up to 5′ long crosswise, or 6′- 6″ lengthwise on the optional riser shelf.
• Requires less effort and time than conventional wrapping methods.
• Reduced wrap cost since only the diameter of the bale is wrapped.
• The automatic operating mode allows the  LINEWRAP to be a one-man operation. The machine wraps while the operator loads.
• A remote for the start/stop/steer and work lights are all standard equipment.
• The  LINEWRAP ’s independent power source is a 13-horsepower gas engine with electric start. An 18-amp alternator powers the hydraulic system which controls all machine functions.
• The self-contained hydraulic system utilizes a large capacity oil reservoir for cooler operation.
• Conveniently located controls.
• Two 30″ pretensioners have a 65% stretch that allows for a tightly wrapped bale.
• The riser bars that allow square bales to be wrapped crosswise are standard equipment.
• The open design of the 7′ bale platform allows debris to fall through.
• The length of travel of the push bar is controlled with adjustable limit switches to reduce cycle time.
• The bale-push is extended out manually to push the bales further down the bale ramp and complete the wrapping process.
• A lock-out valve locks the brakes hydraulically against the tires. This prevents the wrapper from rolling ahead too easily when wrapping so proper pressure is kept between bales.
• The telescoping transport pole is pinned to the manual steering assembly when wrapping to keep the  LINEWRAP in a straight line or to steer around obstacles.
• The tailgate has a transport bar to lock the tailgate and a hydraulic shutoff valve that must be closed for transport.